ICON-fms-vise-series

A Flexible modular system with hundreads of jaws available!

5/5

5 years warranty

Born to be dedicated to machining centres, FMS series of vises allow workholdings with perfect alignment in a space saving design, extremenly high wear resistence, with deflection reduced 2 times in respect to the STD modular vises (base thickness doubled)

The feature (Pathented) which identifies this line of vises consists in the  possibility to trasform each single vise (1 piece clamping) in a self-centering vise with possibility to block from outside to inside and viceversa and in a double vise through the simple substitution of the jaws on the universal vise body base.

" 3 POSITIONS FOR THE FIXED JAW "
“ OUTSIDE TO INSIDE CLAMPING AND VICEVERSA “
" VERTICALLY, HORIZONTALLY AND SIDEWAY VISE POSITIONING ”
" SIDE TO SIDE, BACK TO BACK AND BACK TO SIDE VISE POSITIONING "
" UNLIMITED SPECIAL JAWS "
" SIMPLE AND PRECISE EXCHANGE OF JAWS "
" EXTENSION ELEMENT FOR EXTRA-LONG PIECES "
“ INTEGRAL PROTECTION FROM CHIPS AND DIRTY THROUGH SLIDING PROTECTION “
Previous slide
Next slide

FLEXIBLE STEEL MODULAR SYSTEM

Watch the presentation video of the Gerardi FMS vise series

Parallel plates, stack type & special jaws and interchangeable clamping devices

features

ICON_precision_accuracy

ACCURACY ±0,005mm

ICON_steel_hardened

HARDENED 58±2

DOUBLE THREAD SPINDLE
& GUIDED SLIDES

Completely protected main spindle with left and right thread and slides long as the vise base with multiple movable jaw positions

POSITIONING KEYWAYS

Longitudinal and cross keyways both on the base bottom surface
for horizontal positioning and on the side for vertical positioning

Highest Rigidity

Higher vise base in order to guarantee a better rigidity. Bending reduced two times with respect to the Standard modular vises. Available solid vise towers.

3 Vises in One

Possibility to trasform each single vise in a selfcentering vise with possibility to block from outside to inside and viceversa and in a double vise through the simple substitution of the jaws on the universal vise body base

Quickest Vise Resetting

Pull down jaw plates with comb system (quick hand change)

Third Hand service

It allows the first workpiece loaded to be clamped lightly while the second workpiece is being loaded. Such device is useful especially with the vise vertically positioned.

WORKHOLDING
CATALOGUE 2023

Get a look & download the chapter 5 of the new Workholding 16 2023 or the FMS brochure !