Watch the presentation video about Magnetic Chucks.
Made In Italy
features
ACCURACY ±0,02mm
CAST IRON BODY GJL 250
Magnetization
Magnetism of the strong permanent magnet applied to the upper surface of the chuck through he square pole. With the N/S pole salternately arranged, a magnetic field is generated between the adiacent poles and which securely holds workpiece.
Demagnetization
On the bottom of the square pale, a reversible magnet is fixed. Sending electric current through the coil of the magnet, the polarity of the reversible magnet is inverted. This operation converges the magnetism of the permanent magnet to extinguish the magnetic field on the upper surface of the chuck and releases the workpiece.
no chip entry
The magnetic chucks is divided into two blocks, in this way the upper plate precludes the entry of the chips.
Mobile Pole shoes
They are the kind of shoes that allow the height adjustment of the working surface to the deformation of workpiece, utilizing the sliding of two wedges and the thrust of springs inserted in the product. By using mobile and levelling shoes. It is possible to adapt to the plate’s deformation, to hold it during the first flattening and straightening phase, to obtain an excellent finishing.
Microprocessor Controller
Thanks to the Microprocessor Controller is possible operate quickly and easily with multiple magnetic plates at the same time.
HOW TO USE MAGNETIC PLATES
To allow the magnetic plate to operate, it’s necessary for the workpiece to be positioned on at least two pole. For more efficient clamping it is recommended to use as many poles as possible.